About The C-330'S Sound Set (Voice Setup); Switching Voice Setups - Roland C-330 Owner's Manual

Saving or L oading Songs or Settings

About the C-330's sound set (Voice Setup)

A "Voice Setup" contains data that specifies the volume balance of each sound (stop), its brightness, and various adjustments for
parameters. By loading a voice setup, you can change the overall character of the entire organ (for example to make it a French
Romantic type of organ). The C-330 allows you to switch voice setups. You can also load voice setup files from USB memory.

Switching voice setups

Here's how you can switch to a different voice setup.
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select "11 Save/Load (USB)."
fig.D-Save-1.eps
3.
Press the [Select/Menu] knob.
The "Save/Load (USB)" screen will appear.
fig.Tremulant2.eps
4.
Turn the [Select/Menu] knob to select "Load Voice Setup."
5.
Press the [Select/Menu] knob.
The "Load Voice Setup" screen will appear.
fig.Tremulant2.eps
6.
Turn the [Select/Menu] knob to select the "Load from" field, and turn the [Value/Exit Menu] knob to choose the
location of the voice setup you want to use.
Setting
FACTORY
INTERNAL
7.
Turn the [Select/Menu] knob to select "No."
8.
Turn the [Value/Exit Menu] knob to select the name of the voice setup that you want to use.
If you selected "FACTORY," there will be only one voice setup.
9.
Press the [SET] piston.
The following screen will appear.
If you decide to cancel, press the [Value/Exit Menu] knob.
fig.D-Save-1.eps
50
Explanation
The factory-set voice setup
A voice setup in the C-330's internal memory