Manually Switching Between Internal And External Flight Plan Sources - Garmin GDU 37X Pilot's Manual

Flight Planning
1) From the Active Flight Plan Page or the Saved Flight Plan Page, press the
MENU Key.
2) Turn or move the FMS Joystick to highlight 'Change Data Fields' and press
the ENT Key. The cursor is displayed on the first Data Field.
3) If desired, move the FMS Joystick to highlight the second Data Field.
4) Turn the FMS Joystick to access the list of available Data Fields.
5) Turn or Move the FMS Joystick to highlight the desired option from the list
and press the ENT Key.
MANUALLY SWITCHING BETWEEN INTERNAL AND
EXTERNAL FLIGHT PLAN SOURCES
NOTE: The selection of the internal GPS navigation source to persist through
power cycles or reset to the external GPS navigation source is dependant
on the configuration. Refer to the GDU 37X Installation Manual for more
information.
Press the INTERNAL Softkey on the Active Flight Plan Page or the Direct-to Page, to
temporarily allow flight planning through the GDU 37X using the internal GPS flight
plan when an external GPS Navigator is configured. Press the EXTERNAL Softkey to
return to the external GPS navigator's flight plan.
80
First Data
Field
Data Field Selection (Active Flight Plan Page)
Garmin GDU 37X Pilot's Guide
™
Second Data Third Data
Field Field
190-01054-00 Rev. E