Editing Speed, Fuel Flow, And Flight Plan Name - Garmin GDU 37X Pilot's Manual

Flight Planning
5) With the desired flight plan leg highlighted (blue), press the ENT Key (the
flight plan leg turns magenta). This will grab the flight plan leg.
6) Using the FMS Joystick, drag the flight plan leg to highlight the desired
waypoint to be added.
Active Flight Plan Page (Waypoint Selected with Map Pointer)
7) With the desired waypoint highlighted, press the ENT Key. The flight plan
is now modified to include the added waypoint.
8) Press the DONE Softkey (from the Flight Plan List Page only).

EDITING SPEED, FUEL FLOW, AND FLIGHT PLAN NAME

The Plan Speed and Fuel Flow fields are for flight planning purposes. The values
entered are used by the GDU 37X to estimate flight plan parameters such as ETE and
Fuel Required (FUEL REQD). When on the ground or when reviewing a saved flight
plan the GDU uses Plan Speed to estimate values. When in the air the Plan Speed value
on the Active Flight Plan Page is replaced by actual GPS groundspeed. The GDU 37X
does not have a means of measuring fuel flow so the entered Fuel Flow value is still
used for fuel related calculations.
Adjusting the Active Flight Plan fuel flow:
1) Press the FPL Key and turn the FMS Joystick to display the Active Flight
Plan Page.
2) If an external navigator is configured, press the INTERNAL Softkey.
3) Press the FMS Joystick to activate the cursor, and move the FMS Joystick to
highlight the 'Plan Fuel' field.
4) Using the FMS Joystick, enter the desired plan flow, and press the ENT Key.
90
Selected Waypoint
Garmin GDU 37X Pilot's Guide
™
190-01054-00 Rev. E