Aircraft Symbol - Garmin GDU 37X Pilot's Manual

Or:
1) From the Active Flight Plan Page (with a waypoint entered), press the SEL
APPR Softkey. The Select Approach Window is displayed.
2) Press the MENU Key.
3) Turn or move the FMS Joystick to select 'Show Chart', and press the ENT
Key. The selected chart is displayed.
4) Press the EXIT Softkey to return to the previous page.
Or:
1) From the Map Page or Active Flight Plan Page, use the Map Pointer
to highlight the desired airport and press the ENT Key. The Airport
Information Window is displayed.
2) Press the CHART Softkey.
3) With the 'Chart' Field highlighted, turn the FMS Joystick to access a drop-
down menu of available charts.
4) Turn or move the FMS Joystick to select the desired chart, and press the
ENT Key.
When a terminal procedure chart is not available for the requested airport or there
is an error rendering the data, the banner "CHART NOT AVAILABLE" appears on
the screen. The "CHART NOT AVAILABLE" banner does not refer to the ChartView
subscription, but rather the availability of a particular airport chart selection or
procedure for a selected airport.

AIRCRAFT SYMBOL

The aircraft symbol is shown in magenta on the chart only if the chart is to scale
and the aircraft position is within the boundaries of the chart. The aircraft symbol is
not displayed when the Aircraft Symbol Not Shown Icon (X over the aircraft symbol)
appears in the lower right corner. The Aircraft Symbol Not Shown Icon may appear at
certain times, even if the chart is displayed to scale.
190-01054-00 Rev. E
Chart Not Available Banner
Garmin GDU 37X Pilot's Guide
™
Additional Features
167