Position - Garmin GDU 37X Pilot's Manual

SATELLITE INFORMATION
Satellites currently in view are shown at their respective positions on a satellite
constellation diagram. The outer circle of the constellation diagram represents the
horizon, the inner circle represents 45° above the horizon, and the center point shows
the position directly overhead. Each satellite is represented by a square containing the
Pseudo-Random Noise (PRN) number (i.e., satellite identification number).
The INFO Page can be helpful in troubleshooting weak (or missing) signal levels
due to poor satellite coverage or installation problems. As the GPS receiver locks
onto satellites, a signal strength bar is displayed for each satellite in view, with the
appropriate satellite PRN number (01-32 or 33-64 for WAAS) below each bar. The
progress of satellite acquisition is shown in three stages, as indicated by signal bar
appearance:
- No bar—Receiver is looking for the indicated satellite
- Gray bar—Receiver has collected the necessary data and the satellite signal can
be used
- Green bar—Satellite is being used for the GPS solution

POSITION

The Position box on the INFO Page displays latitude, longitude, accuracy (in feet),
reference waypoint, type, distance, direction, and bearing. The reference waypoint is
designed to display the current position in relation to a prominent landmark. The pilot
can change the reference waypoint 'Nearest Type' using the 'Change Nearest Type'
page menu option. By default the Nearest Type is set to 'Automatic', which will display
the nearest large airport, enroute VOR, or city (in that order).
Reference
Waypoint
190-01054-00 Rev. E
Position Information (INFO Page)
Garmin GDU 37X Pilot's Guide
™
Overview
21