Topography - Garmin GDU 37X Pilot's Manual

Map Page Menu

TOPOGRAPHY

Topographic data can be displayed or removed as described in the following
procedures.
Displaying/removing topographic data:
1) Press the MAP Softkey on the Map Page. Press the VFR MAP Softkey (if
necessary).
2) Press the TOPO Softkey. Topographic data is displayed.
3) Press the TOPO Softkey again to remove topographic data from the
Navigation Map.
Or:
1) From the Map Page, press the MENU Key.
2) Turn or move the FMS Joystick to highlight 'Set Up Map', and press the
ENT Key.
3) Turn the FMS Joystick to highlight the 'Map' Category from the horizontal
list.
4) Move the FMS Joystick to highlight the 'Topo Shading' field.
190-01054-00 Rev. E
Reference Point
Map Page (Measure Distance)
Garmin GDU 37X Pilot's Guide
™
GPS Navigation
Measurement Line
Map Pointer
49