Cooking; Shutdown - Vulcan-Hart ERD50 Installation & Operation Manual

USING THE FRYER (After Startup)
Models Without Basket Lift Option
1. Load the fry basket(s), do not overfill.
2. Carefully lower basket(s) into shortening.
3. Press the desired number to select the product to be timed. Timers
programmed for products. Once the product is selected, select
timing of the product on the left or right side of the fryer.
4. When the timer(s) time out, a beeper sounds, REMOVE # is displayed in the window and the
timer number flashes. Press the flashing timer number to silence the beeper.
Models With One Basket Lift Option
1. Load the fry basket(s), do not overfill.
2. Place the fry basket(s) on the lift arm.
3. Press the desired number to start the timer. Timers
products. Once the product is selected, the timing will start and the single basket lift will lower
the product into the oil.
4. When the timer(s) time out, a beeper sounds and REMOVE # is displayed in the window. The
timer number flashes and the basket(s) automatically raise. Press the flashing timer number to
silence the beeper.
Models With Two Basket Lift Option
1. Load the fry basket(s), do not overfill.
2. Place the fry basket(s) on the lift arm.
3. Press the desired number to select the product to be timed. Timers
programmed for products. Once the product is selected, select
timing of the product on the left or right side of the fryer.
4. When the timer(s) time out, a beeper sounds, REMOVE # is displayed in the window and the
timer number flashes. Press the flashing timer number to silence the beeper.
NOTE: To cancel a timer after it has started, press and hold the timer number for 5 seconds.

SHUTDOWN

1. Press the power switch off.
through
— 20 —
through are
or button to start
are programmed for
through are
or button to start