Name; Switchport General Allowed Vlan - TP-Link TL-SG2216 Reference Manual

Parameter
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Create VLAN Interface 2:
TL-SG2424(config)# interface vlan 2

name

Description
The name command is used to assign a description to a VLAN. To clear the
description, please use no name command.
Syntax
name descript
no name
Parameter
descript ——String to describe the VLAN, which contains 16 characters at most.
Command Mode
VLAN Configuration Mode（VLAN）
Example
Specify the name of VLAN 2 as "group1":
TL-SG2424(config)# vlan 2
TL-SG2424(config-vlan)# name group1

switchport general allowed vlan

Description
The switchport general allowed vlan command is used to add the desired
General port to IEEE 802.1Q VLAN and specify the port's type. To delete the
corresponding VLAN(s), please use no switchport general allowed vlan
command.
Syntax
switchport general allowed vlan vlan-list { tagged | untagged }
no switchport general allowed vlan vlan-list
12