Spanning-Tree Mcheck; Show Spanning-Tree Active - TP-Link TL-SG2216 Reference Manual

removing MAC address entries, which may decrease the performance and
stability of the network. With the Protect of Spanning Tree function enabled, you
can configure the number of TC-BPDUs in a required time, so as to avoid the
process of removing MAC addresses frequently.
Syntax
spanning-tree guard tc
no spanning-tree guard tc
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Enable the TC Protect of Spanning Tree for port 2:
TL-SG2424(config)# interface gigabitEthernet 1/0/2
TL-SG2424(config-if)# spanning-tree guard tc

spanning-tree mcheck

Description
The spanning-tree mcheck command is used to enable mcheck.
Syntax
spanning-tree mcheck
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Enable mcheck for port 2:
TL-SG2424(config)# interface gigabitEthernet 1/0/2
TL-SG2424(config-if)# spanning-tree mcheck

show spanning-tree active

Description
The show spanning-tree active command is used to display the active
information of spanning-tree.
129