Snmp-Server Traps Mac; Snmp-Server Traps Vlan - TP-Link TL-SG2216 Reference Manual

snmp-server traps mac

Description
The snmp-server traps mac command is used to enable SNMP extended
MAC
learn-mode-change and max-learned. To disable the sending of SNMP
extended MAC address related traps, please use no snmp-server traps mac
command.
Syntax
snmp-server traps mac [ new | full | learn-mode-change | max-learned ]
no snmp-server traps mac [ new | full | learn-mode-change | max-learned ]
Parameter
new —— Enable new MAC address trap. It is sent when the switch learns new
MAC address including dynamic address, static address and filter address.
full —— Enable MAC address table trap. It is sent when the MAC address table
is full.
learn-mode-change —— Enable MAC address learn-mode-change trap. It is
sent when MAC address learning mode of the switch changes.
max-learned —— Enable MAC address max-learned trap. It is sent when the
amount of learned MAC address reaches the limit which is configured in port
security module.
Command Mode
Global Configuration Mode
Example
Enable all SNMP extended MAC address-related traps for the switch:
TL-SG2424(config)# snmp-server traps mac
Enable new MAC address trap only for the switch:
TL-SG2424(config)# snmp-server traps mac new

snmp-server traps vlan

Description
The snmp-server traps vlan command is used to enable SNMP extended
VLAN-related traps which include two types: create and delete. To disable this
function, please use no snmp-server traps vlan command.
address-related traps
153
which include four types: new, full,