Switch Stack-Name - TP-Link T3700G-28TQ Cli Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
password —— Super password, a string from 1 to 16 alphanumeric characters
or symbols. The password is case sensitive, allows spaces but ignores leading
spaces, and cannot contain question marks. By default, it is empty.
7 —— Indicates a symmetric encrypted password with a fixed length will follow.
encrypted-password —— A symmetric encrypted password with a fixed length,
which you can copy from another switch configuration. After the encrypted
password is configured, you should use the corresponding unencrypted
password if you re-enter this mode.
Command Mode
Global Configuration Mode
User Guidelines
If the password you configured here is unencrypted and the global encryption
function is enabled in
configuration file will be displayed in the symmetric encrypted form.
Example
Configure the stack's authentication mode as md5 and the unencrypted
password as hello:
T3700G-28TQ(config)# switch authentication-mode md5 hello

switch stack-name

Description
The switch stack-name command is customize the stack's name. To restore to
the default name "Stack", please use no switch stack-name command.
Syntax
swtich stack-name { name }
no switch stack-name
Parameter
name —— Specify the name of the stack.
Command Mode
Global Configuration Mode
service password-encryption, the password in the
31