Interface Vlan; Name - TP-Link T1600-28TS Cli Reference Manual

3.2 interface vlan

Description
The interface vlan command is used to create VLAN Interface and enter
Interface VLAN Mode. To delete VLAN Interface, please use no interface
vlan command.
Syntax
interface vlan
no interface vlan
Parameter
vlan-id
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create VLAN Interface 2:
T1600G-52TS(config)# interface vlan 2

3.3 name

Description
The name command is used to assign a description to a VLAN. To clear the
description, please use no name command.
Syntax
name
no name
Parameter
descript
most.
Command Mode
VLAN Configuration Mode(VLAN)
vlan-id
vlan-id
—— Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
descript
——String to describe the VLAN, which contains 16 characters at
23