Clear Counters; Show Interface Status - TP-Link TL-SG2216 Reference Manual

Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Configure the ingress-rate as 5120Kbps and egress-rate as 1024Kbps for port
5:
TL-SG2424(config)# interface gigabitEthernet 1/0/5
TL-SG2424(config-if)# bandwidth ingress 5120 egress 1024

clear counters

Description
The clear counters command is used to clear the statistic information of all the
Ethernet ports.
Syntax
clear counters
Command Mode
Global Configuration Mode
Example
Clear the statistic information of all ports
TL-SG2424(config)# clear counters

show interface status

Description
The show interface status command is used to display the connective-status
of an Ethernet port.
Syntax
show interface [ gigabitEthernet port ] status
Parameter
port
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the connective-status of all ports:
——
The Ethernet port number.
74