Powerware 5125 User Manual page 44

Additional UPS Features
4. Reconnect the REPO connector to the REPO port.
5. Verify that the externally-connected REPO switch is not
6. Plug in the UPS and start the UPS by pressing the On button.
7. Activate the external REPO switch to test the REPO function.
8. De-activate the external REPO switch and restart the UPS.
38
Figure 26. REPO Connector
activated to enable power to the UPS output receptacles.
Powerware 5125 Two-in-One (2400–3000 VA) User's Guide
®
Pin 1 Pin 2
www.powerware.com