Powerware 5125 User Manual page 26

Installation
You can position the UPS cabinets horizontally or vertically. When
positioning the cabinets horizontally, the EBMs must be placed below
the UPS (see Figure 5).
When positioning the cabinets vertically, the UPS and any optional
EBMs must be stabilized with pedestals and/or EBM brackets. The
vertical setup varies depending on the number of cabinets:
1.
2. Place the UPS cabinet horizontally so that the left end of the
3. Position the pedestals over the end of the UPS cabinet so that
20
UPS
Optional
EBMs
Figure 5. Horizontal Cabinet Setup
both sets of pedestals must be installed.
For one cabinet,
Complete Steps 2 through 4.
the pedestals and the EBM brackets must be
For two cabinets,
installed. Skip to Step 5.
For three or more cabinets,
brackets.
unit is accessible (see Figure 6).
the weight of the unit is evenly distributed. Secure the pedestals
with the screws provided in the accessory kit.
Figure 6. Installing Pedestals on a Single Cabinet
Powerware 5125 Two-in-One (2400–3000 VA) User's Guide
®
skip to Step 8 to install the EBM
:
www.powerware.com