Placing A Call - Polycom CX700 User Manual

Hide thumbs Also See for CX700:

Table of Contents

User Guide Polycom CX 700 IP Phone

Placing a Call

3 - 2

VoIPon

www.voipon.co.uk

If you require additional information or assistance with your new phone,

contact your system administrator.

You can place a call in many ways using your Polycom CX700 IP phone:

•

Dial the number using the dial pad with the handset off-hook or on-hook.

•

Select a contact from the contacts list shown on the graphic display.

•

Select a contact from the contacts list using the Scroll Wheel, then press the

Select key (at the center of the Scroll Wheel).

During a call, you can alternate between Handset, Headset, or Speakerphone

modes by pressing the Speakerphone or Headset keys, or picking up the

handset.

Call duration on an active call is monitored through a local call timer. This is

visible within the active call window on the graphic display. In the figure

below, the call to "+1 (206) 817-..." has lasted three seconds so far.

You need to log in to place all outgoing calls or answer incoming calls. With regard

Note

to the placement of emergency calls, consult your system administrator.

Only four simultaneous calls can be displayed on the graphic display at any time.

sales@voipon.co.uk

Tel: +44 (0)1245 808195

Fax: +44 (0)1245 808299

Table of Contents