Ending A Call; Muting The Microphone; Adjusting The Volume; Redialing A Number - Polycom CX700 User Manual

Ending a Call

Muting the Microphone

Adjusting the Volume

Redialing a Number

VoIPon www.voipon.co.uk
To end a call:
Do one of the following steps:
— Press the EndCall soft key.
— Replace the handset.
— Press the Speakerphone key if you are using the speakerphone.
— Press the Headset key if you are using the optional headset.
During a call, press the Microphone Mute key. Microphone Mute LED turns
on to indicate that the other party cannot hear you.
Microphone Mute applies to calls using the handset, headset, and
speakerphone. You can still hear all other parties while mute is enabled.
To turn off Microphone Mute, press the Microphone Mute key again.
During a call, if you are using the speakerphone, pressing the Volume key
adjusts the speaker volume.
During a call if you are using the handset, pressing the Volume key adjusts the
handset volume.
During a call, if you are using the headset, pressing the Volume key adjusts
the headset volume.
If you press the Volume key when not in call, the ringer volume is adjusted.
You can also adjust volume by selecting the Settings soft key and the Volume
screen. Refer to Adjusting the Volume
To redial any missed call:
Refer to Managing Call Lists
sales@voipon.co.uk
Using the Basic Features of Your Polycom® CX700 IP Phone
on page 2-5.
on page 2-8.
Tel: +44 (0)1245 808195
3 - 5
Fax: +44 (0)1245 808299