Polycom CX 700 Quick Start Manual

Hide thumbs Also See for CX 700:

Download this manual See also: User Manual

Polycom® CX 700 Quick Start Guide

Parts List

Thank you for choosing the Polycom

CX700. The Polycom CX700 connects

directly to your IP network, giving you

full duplex, two-way VoIP telephone

conversations using the embedded

Microsoft® Office Communicator 2007

unified communications client.

Polycom CX 700 Console

Country-Specific

Power Cable

(May not be exactly

as shown)

Polycom CX 700 Quick Start Guide

These items are included in your Polycom

CX700 package. If you are missing any

items, contact your Polycom CX700

reseller.

Handset and Handset Cord

Network Cable

Page 1: Parts List
Polycom® CX 700 Quick Start Guide Parts List Thank you for choosing the Polycom These items are included in your Polycom CX700. The Polycom CX700 connects CX700 package. If you are missing any directly to your IP network, giving you...
Page 2 Connect the network cable to your ethernet port, and then plug the other end of the network cable into the network port on the back of the Polycom CX700. Power can be supplied to the Polycom CX700 via Power over Ethernet.
Page 3: Place Calls
Place Calls You may place calls by using your Contact For more information about installation List, company directory, or the key pad. and startup, refer to the Polycom CX700 For more information, refer to the User Guide. Polycom CX700 User Guide.
Page 4 La prise électrique à laquelle l’appareil est branché doit être installée près de l’équipe- This Polycom CX 700 has been marked with the CE mark. This mark indicates compli- ment et doit toujours être facilement accessible.