Assembling Your Polycom Cx700 Ip Phone; Connecting The Handset And Optional Headset - Polycom CX700 User Manual

Assembling Your Polycom CX700 IP Phone

Connecting the Handset and Optional Headset

VoIPon www.voipon.co.uk
• AC/DC Power Adapter and Power Cord
The power cord shown above is a representation only. Your power cord will vary
Note
depending on your country.
• Quick Start Guide and registration card
Check this list before installation to ensure that you have received each item.
If you are missing any items, contact your system administrator.
This section describes how to assemble your Polycom CX700 IP phone:
• Connect handset and headset (optional)
• Connect network and power source
• Adjust phone base
If your phone is already assembled, go directly to
CX700 IP Phone
To connect the handset and optional headset:
1. Connect one end of the phone cord to the handset and the other end of
the cord to the handset jack on the back of the phone.
sales@voipon.co.uk
Getting Started with Your Polycom® CX700 IP Phone
on page 1-6.
Tel: +44 (0)1245 808195
Features of Your Polycom
1 - 3
Fax: +44 (0)1245 808299