Putting A Call On Hold; Setting Up A Conference - Polycom CX700 User Manual

User Guide Polycom CX 700 IP Phone

Putting a Call on Hold

Setting Up a Conference

3 - 6
VoIPon www.voipon.co.uk
During a call, press the Hold soft key. This will be indicated on the graphic
display by the hold on the graphic display.
Press the Hold key again to resume the call.
Note As using the Hold feature typically generates music or a beeping tone, avoid putting
a conference call on hold.
You can initiate a conference call by selecting one or more contacts, by
selecting a contact group, or by selecting a distribution group. You start a
conference call as an initial phone call and then add more contacts.
To set up a conference:
1. Call the first party.
You can either dial the phone number directly or search for the number in the
Note
Contact Directory or Call Lists. For more information, refer to
3-2, Searching For a Contact
sales@voipon.co.uk
on page 2-11, or Managing Call Lists
Tel: +44 (0)1245 808195
Placing a Call on page
on page 2-8.
Fax: +44 (0)1245 808299