Fujitsu PRIMERGY RX200 S6 Options Manual page 58

Expansion cards and iBBU
Figure 27: Attaching the slot cover extension to the expansion card
Ê Attach the slot cover extension to the slot cover of the expansion card (1).
Ê Fasten the slot cover extension with one screw (2).
Figure 28: Riser card holder #1 equipped with an expansion card
Ê Insert the expansion card into the riser card #1.
I
Make sure that the rear slot cover is positioned in the designated
groove.
Ê If necessary, connect the cables to the expansion card and the other
components.
58 Options Guide
RX200 S6