Fujitsu PRIMERGY RX200 S6 Options Manual page 49

Ê Open the server as described in the
Removing an existing DVD drive or dummy module
Ê Disconnect the DVD cable from the system board and from the HDD
backplane.
Figure 19: Removing the DVD drive or dummy module
Ê Remove the DVD drive or the dummy module by pushing it forward out of the
housing.
I
In order to be able to push out the DVD drive or the dummy module,
you must press the lock on the side (see oval) sideways.
RX200 S6
chapter "Preparation" on page
Options Guide
HDD modules
25.
49