Show Statistics - NETGEAR MBR1515 User Manual

Field
LAN Port MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless Port Name (SSID)
(See Manually
Region
Configure Your
Wireless Settings on
Channel
page 26.)
Wireless AP
Broadcast Name

Show Statistics

Click the Show Statistics button on the Router Status screen to display router usage
statistics:
The following table explains the statistic fields.
Field Description
Status The link status.
TxPkts The number of packets transmitted on this port since reset or manual
clear.
RxPkts The number of packets received on this port since reset or manual
clear.
Collisions The number of collisions on this port since reset or manual clear.
LTE Broadband 11n Wireless Router MBR1515
Description
The Ethernet MAC address that is used by the router's LAN port.
The LAN port IP address. The default is 192.168.0.1.
• Off. The router does not assign IP addresses to computers on
the LAN.
• On. The router assigns IP addresses to computers on the
LAN.
The LAN port IP subnet mask. The default is 255.255.255.0.
The service set ID, also known as the wireless network name.
The country where the unit is set up for use.
The current channel, which determines the operating frequency.
Indicates if the access point feature is disabled or not. If not
enabled, the WiFi LED on the front panel is off.
Indicates if the router is configured to broadcast its SSID.
Manage Your Network
44