Universal Plug And Play - NETGEAR MBR1515 User Manual

2. From the main menu, select Advanced >
Remote Management:
3. Select the Turn Remote Management On
check box.
4. Specify which external addresses are allowed to
access the router's remote management.
For security, restrict access to as few external
IP addresses as practical:
• To allow access from any IP address on
the Internet, select Everyone.
• To allow access from a range of IP
addresses on the Internet, select IP
Address Range. Enter a beginning and ending IP address to define the allowed
range.
• To allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that are allowed access.
5. Specify the port number that is used for accessing the router menu.
Access normally uses the standard HTTP service port 80. For greater security, you can
enter a different port number. Choose a number from 1024 through 65535, but do not use
the number of any common service port. The default is 8080, which is a common
alternate for HTTP.
6. Click Apply to have your changes take effect.
When accessing your router from the Internet, type your router WAN IP address in your
Internet browser address or location field, followed by a colon (:) and the custom port
number. For example, if your external address is 134.177.0.123 and you use port number
8080, enter: http://134.177.0.123:8080. Be sure to include http:// in the address.

Universal Plug and Play

Universal Plug and Play (UPnP) helps devices such as Internet appliances and computers
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
1. From the main menu, select Advanced > UPnP to display the UPnP screen:
2. Fill in the settings on the UPnP screen:
LTE Broadband 11n Wireless Router MBR1515
Advanced
72