Ethernet Broadband Settings - NETGEAR MBR1515 User Manual

Ethernet Broadband Settings


To manually configure your Ethernet Broadband Internet settings:
1. Log in to the router as described in
2. From the main menu, select Ethernet Broadband Settings.
The following question displays at the top of the screen:
Select the option based on the type of account you have with your ISP.
• If you need to enter login information every time you connect to the Internet, or you
have a PPPoE account with your ISP, select Yes.
• Otherwise, select No.
Then fill out the appropriate screen.
For details, see:
step •, Login required
or
step •, Login not required
Note: If you have installed PPP software such as WinPoET (from
Earthlink) or Enternet (from PacBell), then you have PPPoE. Select
Yes. After selecting Yes and configuring your router, you do not
need to run the PPP software on your computer to connect to the
Internet.
• Login required
Adjust the settings as needed based on your Internet connection. The fields in this
screen are described in
LTE Broadband 11n Wireless Router MBR1515
Log In to Your Router
on page 17
on page 19.
Table 4.
Connect to the Internet
17
on page 11.