Wireless Settings; Show Statistics - NETGEAR N150R User Manual

DHCP server. If Off, the router does not assign IP addresses to PCs on the LAN. If On, the
router does assign IP addresses to PCs on the LAN.

Wireless Settings

See on page 23 for a more detailed description of these settings.
WiFi Setup
Name (SSID). The Wi-Fi network name (service set ID) for the wireless network.
Region. The country where the unit is set up for use.
Channel. The current channel, which determines the operating frequency.
Mode. The current mbps setting.
Wireless AP. Indicates if the access point feature is enabled. If disabled, the Wireless LED
on the front panel is off.
Broadcast Name. Indicates if the router is configured to broadcast its SSID.

Show Statistics

Click the Show Statistics button on the Router Status screen to display a screen similar to
the following:
Port
The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN) ports. For each
port, the screen displays the following:
Status. The link status of the port.
•
TxPkts. The number of packets transmitted since reset or manual clear.
•
RxPkts. The number of packets received since reset or manual clear.
•
Collisions. The number of collisions since reset or manual clear.
•
Tx B/s. The current line utilization—percentage of current bandwidth used.
•
Rx B/s. The average line utilization.
•
Up Time. The time elapsed since the last power cycle or reset.
•
N150 WiFi Router (N150R)
Network Management
58