Wps Pin Entry - NETGEAR MBR1515 User Manual

3. Either click the onscreen button or press the WPS button on the front of the router.
The router tries to communicate with the client (the computer that wants to join the
network) for 2 minutes.
4. Go to the client wireless computer, and run a WPS configuration utility. Follow the utility's
instructions to click a WPS button.
5. Go back to the router screen to check for a message.
The router WPS screen displays a message
confirming that the client was added to the
wireless network. The router generates an
SSID and implements WPA/WPA2 wireless
security. The router keeps these wireless
settings unless you change them, or you
clear the Keep Existing Wireless Settings
check box in the Advanced Wireless
Settings screen.
6. Note the new SSID and WPA/WPA2
password for the wireless network. You can
view these settings in the Wireless Settings
screen. See Manually Configure Your
Wireless Settings
To access the Internet from any computer connected to your router, launch a browser such
as Microsoft Internet Explorer or Mozilla Firefox. You should see the router's Internet LED
blink, indicating communication with the ISP.
Note: If no WPS-capable client devices are located during the 2-minute
time frame, the SSID does not change, and no security is set up.

WPS PIN Entry

Any wireless computer or device that connects to the router wirelessly is a client. The client
must support a WPS PIN, and must have a WPS configuration utility, such as the NETGEAR
Smart Wizard or Atheros Jumpstart.
The first time you add a WPS client, make sure that the Keep Existing Wireless Settings
check box on the Advanced Wireless WPS Settings screen is cleared. This setting is the
default setting for the router and allows it to generate the SSID and WPA/WPA2 security
settings when it implements WPS. After WPS is implemented, the router automatically
selects this check box so that your SSID and wireless security settings stay the same if other
WPS devices are added later.

To use a PIN to add a WPS client:
1. Log in to the router as described in
LTE Broadband 11n Wireless Router MBR1515
on page 26.
Log In to Your Router
Wireless Network Configuration
on page 11.
30