Display Assembly - HP ProBook 5330m Maintenance And Service Manual

Display assembly

Description
Display bezel
Webcam module
Display Hinge Kit (includes left and right display hinges)
Display hinge covers
WLAN antennas and cables (included in the Antenna Kit, spare part number 650365-001)
WWAN antennas and cables (included in the Antenna Kit, spare part number 650365-001)
Display back cover
NOTE: Removing the display panel is not required to remove the display assembly. If it is
necessary to remove the wecam module, WLAN module, or WWAN module, remove the display
bezel for access to those components. For display bezel removal instructions, see
on page 74.
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. (Optional) Remove the display panel (see
6. Remove the service access cover (see
7. Remove the keyboard (see
8. Remove the fan (see
9. Remove the top cover (see
10. Remove the speakers (see
11. Remove the system board (see
12. Remove the power connector cable (see
Remove the display assembly:
1. Position the computer right-side up, with the front toward you.
Battery on page 37).
Display panel on page
Service access cover on page
Keyboard on page
Fan on page 55).
Top cover on page
Speakers on page
System board on page
Power connector cable on page
74).
52).
57).
67).
68).
Component replacement procedures
Spare part number
650368-001
650405-001
650374-001
650376-001
650366-001
Display panel
39).
72).
77