Speakers - HP ProBook 5330m Maintenance And Service Manual

Speakers

Description
Speakers
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the keyboard (see
7. Remove the fan (see
8. Remove the top cover (see
Remove the speakers:
1. Position the computer right-side up, with the front toward you.
2. Disconnect the speaker cable (1) from the system board.
3. Remove the four Phillips M2.5x2.5 screws (2) that secure the speakers to the base enclosure.
4. Gently lift up on the edge of the system board above the left speaker (3), and then lift the
speakers straight up from the base enclosure (4).
Reverse this procedure to install the speakers.
Battery on page 37).
Service access cover on page
Keyboard on page
Fan on page 55).
Top cover on page
52).
57).
Component replacement procedures
Spare part number
650400-001
39).
67