Power Button Board - HP ProBook 5330m Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the keyboard (see
7. Remove the fan (see
8. Remove the top cover (see
Remove the power button board:
1. Position the top cover upside down on a flat surface, with the front toward you. The power button
board is located in the top right corner of the top cover.
2. Remove the T8 2.5x4.0 screw (1) and lift the power button board (2) straight up from the top
cover.
Reverse this procedure to install the power button board.
Battery on page 37).
Service access cover on page
Keyboard on page
Fan on page 55).
Top cover on page
52).
57).
Component replacement procedures
Spare part number
650392-001
39).
61