Electrolux W365H Service Manual page 164

23
5. Start "CMM
6. A menu where various service interventions
can be made is displayed.
7. Click "Service".
8. "Service menu" is shown.
9. Click I/O-board address.
10. Click I/O-board to be configured.
Press the button on I/O board 1.
Fig.
8
A confirmation will be shown on the PC-
screen.
11. Continue in this fashion for other new and
unprogrammed I/O boards (if present).
12. When ready, disconnect the cable between
the PC and the CPU board.
78
23. Programme unit
G3000".
8
Pushbutton for
programming
I/O-board
Service
Manual
3973
438 9145-41/03
03.11