Electrolux W365H Service Manual page 161

Service
Manual
Fig. 6. Switch off the machine's main power switch.
6
Install the new CPU board and connect all the
PCB connectors. Connect the correct cable
between the computer (COM1 port) and the
interface connector X7 on the CPU board.
Switch the machine's main power switch back
on.
7. Click OK. The downloading is started. An
indication that downloading is working OK is
that the two LED's at the lower left corner Red
Tx and Yellow Rx are flashing within one
minute.
The computer will now process and adapt the
five files for downloading onto the CPU board.
This will take a minute or so.
438 9145-41/03
03.11
23. Programme unit
6
CPU circuit board
23
X7
3972
75