Electrolux W365H Service Manual page 118

23
ADJUST SPIN SPEED ALLOWED.
DISPLAY REMAINING TIME
DISPLAY ACTUAL TEMPERATURE
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER
°
TEMPERATURE IN C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
LEVEL HIGH
MIDDLE TEMPERATURE COOL -DOWN70 °C
Y/N
DISPLAY REMAINING TIME
DISPLAY ACTUAL TEMPERATURE
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER
TEMPERATURE IN °C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
LEVEL HIGH
MIDDLE TEMPERATURE COOL-DOWN 70 °C
DEFAULT MOTOR ON TIME
Y/N
32
23. Programme unit
Y
Y
Y
Y
N
Y
Y
N
175
0
135
150
175
Answer Yes (Y) or No (N).
Press .
Y
Y
Y
N
Y
Y
N
175
0
135
150
175
0:12
Answer Yes (Y) or No (N).
Press .
°
Temperature in C
Here you determine if all temperatures are to be
shown in °C or °F.
If you answer Yes (Y):
All temperatures will be shown in °C.
If you answer No (N):
All temperatures will be shown in °F.
Repeat program mode question
Here you determine whether you (or the user) will be
given the chance to select either Standard or
Advanced mode for each new program module you
are programming, if you start programming in
Standard mode.
If you answer Yes (Y):
You can select either Standard or Advanced
mode for each new program module you program.
If you answer No (N):
All modules must be programmed using either
Standard mode or Advanced mode consistently,
whichever is selected when you begin
programming.
Service
Manual
438 9145-41/03
03.11