Electrolux W365H Service Manual page 137

Service
Manual
PAUSE TEST LEVEL
PAUSE TEST TEMPERATURE
DEFAULT TEMPERATURE HYSTERIS
TEMPERATURE STEP IN COOL-DOWN
DEFAULT LOW EXTRACT TIME
DEFAULT MEDIUM EXTRACT TIME
DEFAULT HIGH EXTRACT TIME
DEFAULT DRAIN TIME
DEFAULT DISTR. TIME
DO UNBALANCE MEASUREMENT
DRAIN OPEN DELAY
START EXTRACT TIME
ROLLOUT TIME
PAY PER WASH ALARM
1
4
7
DEFAULT TEMPERATURE HYSTERIS
TEMPERATURE STEP IN COOL-DOWN
DEFAULT LOW EXTRACT TIME
DEFAULT MEDIUM EXTRACT TIME
DEFAULT HIGH EXTRACT TIME
DEFAULT DRAIN TIME
DEFAULT DISTR. TIME
DO UNBALANCE MEASUREMENT
DRAIN OPEN DELAY
START EXTRACT TIME
ROLLOUT TIME
PAY PER WASH ALARM
LOCK TEST DELAY
DRAIN TIME WHEN OVERFILL
Y/N
438 9145-41/03
03.11
23. Programme unit
0
-18 °C
4 °C
4 °C
00:00
00:00
00:00
00:00
00:00
N
0:13
00:30
00:01
0
Use the numeric keys to
2 3
enter the value.
5 6
8 9
If you make a mistake while
entering digits:
0
Press ERASE.
When you have finished:
Press .
4°C
4 °C
00:00
00:00
00:00
00:00
00:00
N
0:13
00:30
00:01
0
0:10
0:05
Answer Yes (Y) or No (N).
Press .
Default values for re-start after unbalance
Here you determine the drain time and distribution
time the machine will use if it cannot find the time
parameters it requires, e.g. during manual
operation of the drain in a washer extractor with a
suspended drum.
Unbalance measurement
Here you determine whether the machine will
calculate unbalance before it accelerates to
extraction speed. Drum unbalance can only be
calculated in washer extractors with suspended
drums. It uses torque data from the motor control
unit to determine whether the imbalance is too
high.
For washer extractors with suspended drums
without frequence control and which have a
separate unbalance switch, the answer to this
question should be No.
If you answer Yes (Y):
The machine will calculate unbalance before
every extraction sequence.
If you answer No (N):
The machine will not calculate unbalance.
23
51