Remote - Samsung SVR-3200 User Manual

User Manual
NTP Server Location
This is enabled when NTP Mode is set to Client. This determines whether the NTP server is on
a local network or on the Internet.
NTP Local Server IP
This is enabled when the NTP Server Location is set to Local and is used to set the IP of the
NTP server. Enter either the IP of an NTP server on the local network or the IP of a DVR with its
NTP mode set to Server.
Interval
This menu is used to set the synchronization interval.
When NTP Mode is set to Client, Sync With NTP must be set to On.

6.8.4 Remote

DVR ID
This sets the address of the keyboard when operating all DVR functions with the controller
buttons. The default value is "1". If one keyboard is connected to several DVRs, it might conflict
with other channels, so a different value should be set for the keyboard address.
Remote Controller ID
Up to 16 remote controller IDs can be set. You can use one remote controller to operate up to
16 DVRs.
72