Event Action - Samsung SVR-3200 User Manual

User Manual
Digital I/O are digital ports available for input and output at the same time., There are 12 digital
inputs and outputs.
Digital I/O Channel & Input/Output
All 12 channels can be set to input/output. When channels are set to input, if an input signal is
received by even one channel, emergency recording will operate. When they are set to output, if
sensor input is received, it will operate.
In Digital I/O Setup, if you set one of the 12 Digital I/O to [Input], set Input Type to [Emergency]
and turn Digital I/O on, the emergency recording will operate. The macro set in the event
recording is used for the recording. The recording will continue based on the value set in
[Recording After Event] under Event Recording and then stop.

6.7.6 Event Action

This sets actions based on event input.
Event Action
For Event Action, you can select Relay 1~4, buzzer, or E-Mail.
Action Duration
Action Duration is used to maintain an action for a specified time when relay or buzzer is set. If
E-Mail is set, e-mails are sent in specified time intervals.
Normal Event Source
You can set Normal Event Source to 16 Sensors, 16 MDs, 16 Video Losses and Text.
61