Cisco DPC2434 User Manual page 82

How Do I Configure the Wireless Home Gateway?
Setup Advanced Settings - Port Filtering Page Description
Use this page to enter and enable the desired port filtering ranges and protocols in
the appropriate fields and then click Apply to apply and save your new port
filtering settings.
Configuring Port Forwarding for Local IP Addresses
Use the Setup Advanced Settings - Port Forwarding page to configure port
forwarding for local IP addresses. Port forwarding allows you to run a server on the
LAN by specifying the mapping of TCP/UDP ports to a local PC. You must also set
up a fixed private LAN IP address for the destination device.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the wireless home
gateway default advanced port forwarding settings.
Click Port Forwarding in the Advanced Settings section of the Setup page to access
the Setup Advanced Settings - Port Forwarding page.
82 4011350 Rev D