Cisco DPC2434 User Manual page 68

How Do I Configure the Wireless Home Gateway?
Field Name
Domain
Name
Static IP
Address
Static IP Mask
Default
Gateway
Primary DNS
(static IP
only)
Secondary
DNS
(static IP
only)
MTU Size
Function Keys
The following function keys appear on the Setup Basic Settings - Network
Configuration page.
Key
Renew WAN
IP Address
Lease
Apply
68
Description
Displays the domain name that is usually downloaded to your
gateway by your ISP. However, some ISPs require this
information to be entered manually. If manual entry is
required, your ISP will provide the information for you to
enter into this field.
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Note: When setting a static IP address, you must enter the IP
address, subnet mask, and default gateway before the static IP
address will become operational.
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Manual entry is required, your ISP will provide the
information for you to enter into this field.
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Sets the size of the maximum transmission unit (MTU) for the
network interface. The default value is 0 (zero).
Important: Do not change this value unless you are an
experienced user.
Description
Forces a release and renewal of your WAN IP address
Saves the values you enter into the fields without closing the
screen
4011350 Rev D