How Do I Maintain The Batteries - Cisco DPC2434 User Manual

How Do I Maintain the Batteries?

How Do I Maintain the Batteries?
Your modem includes up to two rechargeable Lithium-Ion batteries to provide
stand-by operation in the event of an AC power failure. You can replace one or both
of the batteries without the use of any tools.
Note: Heed the battery safety instructions located in the IMPORTANT SAFETY
INSTRUCTIONS section.
WARNING:
There is danger of explosion if the battery is mishandled or incorrectly
replaced. Replace only with the same type of battery. Do not disassemble it or
attempt to recharge the battery outside the system. Do not crush, puncture,
dispose of in a fire, short external contacts, or expose to water or other liquids.
Dispose of the battery in accordance with local regulations and instructions
from your service provider.
Charging the Batteries
The batteries begin to charge automatically as soon as you attach the modem to the
AC electrical outlet. When you first plug in the modem, the POWER LED status
indicator illuminates. The BATTERY LED status indicator illuminates when the
battery is fully charged and operational.
Important: It may take as long as 24 hours for each battery to charge fully.
Using the Modem Without a Battery
If you want, you can use the modem without a battery. If you need to remove the
batteries, follow the procedures found in Removing and Replacing the Batteries
(on page 51).
Important: If you choose to operate your modem without a battery, you risk losing
your telephone service during a power outage.
Replacing the Batteries
Under normal circumstances, the battery should last for several years. Should the
BATTERY LED status indicator turn off and remain off, this could indicate that the
battery may need to be replaced. Contact your service provider to obtain
replacement batteries and for disposal instructions.
Note: Follow the steps found in Removing and Replacing the Batteries (on page 51),
to remove and replace one or both of the batteries.
50 4011350 Rev D