Cisco DPC2434 User Manual page 77

Setup Advanced Settings - Options Page Description
The following table provides a description of the fields within the Setup Advanced
Settings - Options page.
Note: If you make changes in the Setup Advanced Settings - Options page, click
Apply to apply and save your new IP address filter settings.
Field Name
WAN Blocking
Ipsec PassThrough
PPTP PassThrough
Remote Config
Management
Multicast Enable
UPnP Enable
4011350 Rev D
Description
Checking this box prevents the wireless home gateway from
being visible to the WAN. For example, pings to the WAN IP
address are not returned
Checking this box allows applications that use IPSec (IP
Security) to pass through the firewall
Checking this box allows applications that use Point to Point
Tunneling Protocol (PPTP) to pass through the firewall
Checking this box enables Remote Configuration
Management that allows the user or network operator to
view and/or modify the gateway set-up parameters from a
location on the WAN, as opposed to the LAN side of the
gateway. Access to the set-up parameters is obtained by
using the password to access the WebWizard.
Enable this feature by checking the Remote Config
Management box on the Setup Advanced Settings - Options
page. To access your gateway from a remote location, you
must also know the WAN IP address of the gateway. To find
the WAN IP address, go to the Network Configuration page
under Basic Settings. You will find the gateway's WAN IP
address list on this page.
Enter the WAN IP address of your gateway into the address
field of any Web browser using the following format:
http://xxx.xxx.xxx.xxx:8080 where xxx.xxx.xxx.xxx
represents the WAN IP address of your gateway.
Be sure to follow the syntax exactly, and then click Go or
press Enter. Your gateway Web pages will appear on the
remote computer. You will still need to enter your password
to access the Setup pages of your gateway
Note: If you choose to enable (check) this feature, be sure to
set up a user password to prevent unauthorized access to
your gateway settings.
Checking this box allows multicasts to pass from the WAN
side through to the private network
Checking this box enables Universal Plug and Play features
How Do I Configure the Wireless Home Gateway?
77