Media Errors; Ribbon Errors - Brady BBP 33 User Manual

Media Errors

Problem
Error reading media memory
cell. Reload or replace media.
Errors: 48, 49, 50, 51, 52
Media out.
Error: 53
Media is jammed.
Error: 54
Media not detected.
Error: 55

Ribbon Errors

Problem
Ribbon Out.
Error: 58
Ribbon too narrow.
Error: 62
Error reading ribbon memory
cell.
Errors: 64, 65, 66, 67, 68
Media mismatch.
Error: 69
®
BBP 33 Sign & Label Printer User's Manual
Cause
Printer cannot read the media
memory cell: media validation failed
[48]; cannot read media cell [49];
cannot read memory CRC [50]; cell
is wrong version [51]; media counter
shows no media remaining [52].
Media sensor shows end of media.
Print job canceled.
Media is jammed somewhere in the
printer. Print job canceled.
Media is not loaded correctly.
Cause
The ribbon ran out or broke during
the print job.
The installed ribbon is narrower than
the installed media.
The printer cannot read the ribbon
memory cell: memory cell code
incorrect [64], cannot read cell [65],
data in cell is corrupted [66], cell is
wrong version [67], ribbon counter
shows no ribbon remaining [68].
The installed ribbon is not
recommended for use with the
current media.
Corrective Action
Replace media. If problem persists,
contact Technical support.
Verify media guides are positioned
correctly at the edge of the media or
replace roll if empty.
Clear the media path and re-initiate the
print job.
Reload media:
1. Insert media.
2. Feed media between guides to
middle of black roller.
3. Verify guides are positioned to media
edge.
Corrective Action
Replace ribbon and close inside printer
cover. Re-initiate the print job.
Replace the ribbon cartridge with wider
ribbon.
- or -
Replace the media with a width that
matches the ribbon.
Replace the ribbon. If problem persists,
contact Technical Support.
Replace the ribbon with a type that is
compatible with the media.
- or -
Replace the media with a type that is
compatible with the ribbon.
Messages
Ribbon Errors
-
5 3