Adjusting Audio Settings And Sound Distribution Settings - Blaupunkt TravelPilot DX-R4 Operating Instructions Manual

INTRODUCTION NAVIGATION

Adjusting audio settings and sound distribution settings

The TravelPilot allows you to adjust the bass and treble for each audio source.
Changes to the balance and fader sound distribution settings and loudness set-
tings (aurally compensated volume) affect all the audio sources.
To adjust the audio settings,
press the TU button A or CD-C button ? to switch to the audio source
1
(radio, CD or CD changer) whose settings you would like to adjust.
Press the AUD button 3.
2
The audio settings menu opens.
Use the right knob/pushbutton ; to move the selection marker to the
3
menu item whose settings you want to change.
Press the right knob/pushbutton ;.
4
The slide control appears surrounded by a border.
Use the right knob/pushbutton ; to make the adjustments.
5
If you wish to apply your adjusted values,
press the right knob/pushbutton ;.
6
The border around the slide control disappears and the values are saved.
Note: If you do not press a button within 30 seconds, the display
will switch back automatically to the initial menu (timeout).
RADIO MODE CD MODE CD CHANGER SETUP
FM TONE
BASS
TREBLE
BALANCE
FADER
LOUDNESS
FM TONE
BASS
TREBLE
BALANCE
FADER
LOUDNESS
Audio menu for the FM radio audio source
INDEX
14
- +
- +
- +
- +
- +
- +