Setting The Clock - Blaupunkt TravelPilot DX-R4 Operating Instructions Manual

INTRODUCTION NAVIGATION

Setting the clock

In the CLOCK setup menu, you can activate / deactivate summer time, set the
time format (12/24 hour), and set the time zone in relation to the standard time
(GMT). These settings are necessary so that the TravelPilot can calculate the
system time from the received GPS time. In addition, you can activate / deacti-
vate the status clock (when the status clock is active, the time is displayed in the
status line of the currently active audio source), and turn the main clock on / off
(time display when the unit is switched off and the ignition is turned on).
Switching the status clock on/off
1 Highlight the CLOCK menu item in the setup menu.
2 Highlight STATUS CLOCK.
Keep pressing the right knob/pushbutton ; until the required ON or OFF
3
setting is displayed.
Note: The status clock hides other symbols in the main menus of
the audio sources.
Switching the main clock on/off
1 Highlight the CLOCK menu item in the setup menu.
2 Highlight MAIN CLOCK.
Keep pressing the right knob/pushbutton ; until the required ON or OFF
3
setting is displayed.
Selecting the time format
1 Highlight the CLOCK menu item in the setup menu.
2 Select SETTINGS.
3 Highlight the TIME FORMA menu item.
Keep pressing the right knob/pushbutton ; until the required 12H or 24H
4
setting is displayed.
RADIO MODE CD MODE CD CHANGER SETUP
CLOCK
SETTINGS
STATUS CLOCK
MAIN CLOCK
CLOCK
TIME FORMA
TIME ZONE
SUMMER TIME
GPS TIME
SYSTEMTIME
INDEX
98
OFF
OFF
24H
+1
OFF
02:42 h
03:42 h