Tmc (Traffic Message Channel); Tuning Into Fm Stations - Blaupunkt TravelPilot DX-R4 Operating Instructions Manual

INTRODUCTION NAVIGATION
Interrupting a traffic announcement
You can cancel the announcement by pressing the TA 4, MEN : und ESC 9
buttons or by tuning into another station.

TMC (Traffic Message Channel)

TMC stands for Traffic Message Channel and refers to broadcast digital traffic
information that can be analysed by the TravelPilot for dynamic navigation. The
TMC function is currently not supported by all radio stations, so sometimes it
may not be possible to receive a TMC station in certain regions. When dynamic
navigation is active, the TravelPilot tunes into a TMC station automatically. For
further details, read the section entitled "Dynamic navigation" in the "Navigation"
chapter. If a TMC station is being received, a TMC symbol appears in the status
line. Six TMC stations can be stored in the FMC memory.
TIP: You can conveniently store the six TMC stations with the strongest
reception in the region using the TMC Store function. For further informa-
tion, read the section entitled "Storing TMC stations automatically" in this
chapter.

Tuning into FM stations

The TravelPilot provides several options for tuning into radio stations.
To do so, you have to configure what functions are assigned to the << / >> 2
buttons in the radio mode's setup menu.
Press the MEN button :.
1
The setup menu is displayed.
2 Keep pressing the softkey assigned to SEARCH until the required > or >>
option appears. The default setting is >>.
The > option means that when the RDS function is switched on, you can browse
through the broadcasting network (for further information, read "Browsing through
broadcasting networks" later on.) If the RDS function is switched off, you can
RADIO MODE CD MODE CD CHANGER SETUP INDEX
60