Activating / Deactivating Rds-Reg - Blaupunkt TravelPilot DX-R4 Operating Instructions Manual

1 Switch to radio mode.
Press the MEN button :.
2
The radio mode's setup menu appears.
You will find the RDS item in the lower left display line. You can choose between
the VAR, FIX and OFF options. The default setting is VAR.
3 Keep pressing the softkey assigned to RDS until the required option ap-
pears alongside RDS.
FIX: RDS radio mode is activated. Since some stations not only use RDS
to broadcast their names but also advertising, you have the option of
keeping the station name permanently in the display. Changing display
contents, e.g. advertising, will not be displayed.
VAR: Default setting; RDS radio mode is fully activated. Changing dis-
play contents, e.g. advertising, will also be displayed.
OFF: RDS radio mode is deactivated. Stations can be tuned into using
the frequency details in the display. The "alternative frequency" function
is also deactivated.

Activating / deactivating RDS-REG

A further advantage provided by RDS is the "alternative frequency" function.
The unit constantly tunes into the frequency offering the best reception for a
particular station. However, some stations divide their content at certain times
into regional programmes that are tailored to a certain region. The "alternative
frequency" feature may therefore sometimes interrupt reception of a regional
programme because it has automatically switched frequency. If you are listen-
ing to a regional programme and want to prevent the unit from switching to
another frequency, select the ON setting for the REG item in the radio mode
menu. The unit will then only retune if it appears that a "loss of reception" is
about to occur, i.e. if the station can no longer be received on the tuned frequen-
cy.
INTRODUCTION NAVIGATION RADIO MODE CD MODE
JUMP
SEARCH >>
PTY ON
RDS VAR OFF
CD CHANGER SETUP
ON REG
OFF SHARX
R-TXT
57
INDEX