Table of Contents
Advertisement
6: AUTO WAH
Cyclically controls a filter to create cyclic change in timbre.
L in
Auto Wah
R in
Auto Wah
Parameter
Value
Switch
OFF, ON
MANUAL,
Depth Knob
SENS,
RATE,
DEPTH,
Rate Knob
PHASE
Filter Type
LPF, BPF
Manual #
0–127
Peak
0–127
Sens #
0–127
Polarity
UP, DOWN
Rate (sync sw) #
OFF, ON
0.05–10.00 [Hz]
Rate (Hz) #/
Rate (note) #
note (p. 31)
Depth #
0–127
Phase #
0–180 [deg]
Low Gain
-15–+15 [dB]
High Gain
-15–+15 [dB]
Level
0–127
L out
2-Band EQ
R out
2-Band EQ
Explanation
Turns the effect on/off.
Specifies the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Specifies the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Type of filter
LPF: The wah effect will be applied
over a wide frequency range.
BPF: The wah effect will be applied
over a narrow frequency range.
Adjusts the basic frequency at which
the effect is applied.
Adjusts the amount of the wah effect
that will occur in the range of the basic
frequency.
Set a higher value for Q to narrow the
range to be affected.
Adjusts the sensitivity with which the
filter is controlled.
Sets the direction in which the
frequency will change when the
auto-wah filter is modulated.
UP: The filter will change toward a
higher frequency.
DOWN: The filter will change toward a
lower frequency.
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner's manual p. 24).
Frequency of modulation
Depth of modulation
Adjusts the degree of phase shift of
the left and right sounds when the
wah effect is applied.
Gain of the low range
Gain of the high range
Output Level
7: HUMANIZER
Adds a vowel character to the sound, making it similar to a human
voice.
L in
Overdrive
R in
Parameter
Value
Switch
OFF, ON
DRIVE,
Depth Knob
RATE,
DEPTH,
MANUAL,
Rate Knob
PAN
Drive Sw
OFF, ON
Drive #
0–127
Vowel1
A, E, I, O, U
Vowel2
A, E, I, O, U
Rate (sync sw) #
OFF, ON
0.05–10.00 [Hz]
Rate (Hz) # /
Rate (note) #
note (p. 31)
Depth #
0–127
Input Sync Sw
OFF, ON
Input Sync
0–127
Threshold
Manual #
0–100
Low Gain
-15–+15 [dB]
High Gain
-15–+15 [dB]
Pan #
L64–63R
Level
0–127
Modulation FX Parameters
Pan L
2-Band
Formant
EQ
Pan R
Explanation
Turns the effect on/off.
Specifies the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Specifies the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Turns Drive on/off.
Degree of distortion
Also changes the volume.
Selects the vowel.
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner's manual p. 24).
Frequency at which the two vowels
switch
Effect depth
LFO reset on/off
Determines whether the LFO for
switching the vowels is reset by the
input signal (ON) or not (OFF).
Volume level at which reset is applied
Point at which Vowel 1/2 switch
49 or less: Vowel 1 will have a longer
duration.
50: Vowel 1 and 2 will be of equal
duration.
51 or more: Vowel 2 will have a longer
duration.
Gain of the low frequency range
Gain of the high frequency range
Stereo location of the output
Output level
L out
R out
7
Advertisement
Table of Contents
