Enhancer " Delay; Chorus " Delay - Roland RD-800 Manual

53: ENHANCER " DELAY

L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Switch OFF, ON
ENHANCER SENS,
Depth Knob
ENHANCER MIX,
DELAY
FEEDBACK,
Rate Knob
DELAY BALANCE
Enhancer Sens #
0–127
Enhancer Mix # 0–127
Delay Time
OFF, ON
(sync sw)
Delay Time
1–2600 [msec]
(msec)/
Delay Time
note (p. 31)
(note)
Delay Feedback
-98–+98 [%]
#
200–8000 [Hz],
Delay HF Damp
BYPASS
D100:0W–
Delay Balance #
D0:100W
Level 0–127
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Turns the effect on/off.
Specifies the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Specifies the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner's manual p. 24).
Adjusts the delay time from the direct
sound until the delay sound is heard.
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative "-" settings will invert the
phase.
Adjusts the frequency above which
sound fed back to the effect will be cut
(BYPASS: no cut).
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Output Level

54: CHORUS " DELAY

Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Switch
OFF, ON
CHORUS RATE,
Depth Knob
CHORUS
BALANCE,
DELAY
FEEDBACK,
Rate Knob
DELAY BALANCE
Chorus Pre Delay 0.0–100 [msec]
Chorus Rate
OFF, ON
(sync sw) #
Chorus Rate
0.05–10.00 [Hz]
(Hz) #/
Chorus Rate
note (p. 31)
(note) #
Chorus Depth 0–127
D100:0W–
Chorus Balance #
D0:100W
Delay Time
OFF, ON
(sync sw)
Delay Time
1–2600 [msec]
(msec)/
Delay Time
note (p. 31)
(note)
Delay Feedback
-98–+98 [%]
#
200–8000 [Hz],
Delay HF Damp
BYPASS
D100:0W–
Delay Balance #
D0:100W
Level 0–127
Modulation FX Parameters
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Turns the effect on/off.
Specifies the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Specifies the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Adjusts the delay time from the direct
sound until the chorus sound is heard.
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner's manual p. 24).
Frequency of modulation
Depth of modulation
Volume balance between the direct
sound (D) and the chorus sound (W)
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner's manual p. 24).
Adjusts the delay time from the direct
sound until the delay sound is heard.
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative "-" settings will invert the
phase.
Adjusts the frequency above which
sound fed back to the effect will be cut
(BYPASS: no cut).
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Output Level
29