Custom Setting Function - Sekonic Flashmate L-308S Operating Manual

3. Custom setting function

To match your camera, you can set the setting value
and display value to full, 1/2 or 1/3 stop.
1) To enter custom setting mode, hold down the
Mode button
q
button .
2) Once custom setting mode is entered, the
'CS' for custom setting will be displayed in
the ISO display area, and the setting number
will be displayed in the aperture value display
area.
3) The setting number will change every time
the Mode button
1 stop
(1/10 stop display)
4) After completing the custom setting, turn OFF the power button to close the
custom setting mode. The power will be automatically turned OFF with this
operation.
NOTE:
e
and turn ON the power
e
is pressed.
The 1/10 stop measurement value displayed when 1 stop is set
will not be displayed when 1/2 stop or 1/3 stop is set.
When using EV mode the 1/10 stop measurement value will be
displayed whatever the stop is set.
6. Advanced Functions
1/2 stop
POWER
MODE
Setting number
1/3 stop