5. Measurement
When the display range is exceeded, and E.o appears, press the Up button
to change the shutter speed to the high-speed side and thus enable an
appropriate corresponding aperture value to be displayed.
When the display range is exceeded, and E.u appears, press the Down
u
button
an appropriate corresponding aperture value to be displayed.
NOTE:
• When brightness (or darkness) exceeds the measuring range
1-2 EV mode
1) Press Mode button
select
to alter the shutter speed to the slow-speed side and thus enable
of the L-308S, E.o (or E.u) will blink to indicate that measuring
is not possible. In such cases please adjust brightness.
e
to
mode.
MODE
y