Scanning To A Memory Card - Kodak HERO 4.2 Extended User Manual

Scanning to a memory card

1. Insert the memory card into the memory card slot on the printer.
2. Lift the scanner lid, and place the original face down in the front right-hand corner of the scanner glass, then
close the lid.
3. Close the lid.
4. Press .
5. Touch Scan.
6. Touch Memory Card, then touch the setting/option you want to change.
Scan Option
Scan What
File Type
Scan Size
Save as Defaults
7. Press to begin scanning.
Settings
Photo (default)
Document
JPG (default)
Single-page PDF
Multi-page PDF
Auto (default)
51 x 76 mm (3 x 2")
89 x 127 mm (5 x 3.5")
102 x 152 mm (6 x 4")
102 x 178 mm (7 x 4")
102 x 203 mm (8 x 4")
127 x 178 mm (7 x 5")
102 x 305 mm (12 x 4")
203 x 254 mm (10 x 8")
216 x 279 mm (11 x 8.5")
A4
No / Yes
www.kodak.com/go/aiosupport
KODAK HERO 4.2 All-in-One Printer
Description
Sets the scan settings for scanning a picture (see
Changing the scan settings for scanning from the
control panel, 55).
Sets the scan settings for scanning a document (see
Changing the scan settings for scanning from the
control panel, 55).
The scanned file is saved as a JPG.
The scanned file is saved as a single-page PDF.
The scanned file is saved as a multiple-page PDF.
Determines the size that is scanned.
To save the settings as the new default, press Yes.
59